Product turns on or off by itself | L1 Pro16 Portable Line Array System
l1-pro16-portable-line-array-system
L1 Pro16 Portable Line Array SystemSold from 2020

Product turns on or off by itself | L1 Pro16 Portable Line Array System

If the issue occurs when a computer with Bluetooth® powers on, turn off Bluetooth on the computer or disconnect your product from it.

Some computers might automatically reconnect to previously connected Bluetooth devices. To prevent this, open the computer settings and turn off Bluetooth. Or, find your product in the Bose Connect app, then tap the Settings icon, select Connections and click the x next to the computer name to remove it from your product memory.

Check the power cord connections.

Make sure the power cord is firmly seated at both ends. For more info, see Connecting to power.

Be sure the power cord is connected to a working power outlet.

If the outlet is controlled by a wall switch, be sure the switch is on. You can also verify if the outlet works by connecting another electronic device, such as a lamp. If connected to a power strip (or surge protector), try bypassing the power strip and plug the power cord directly to a wall outlet.

Check for and install any available product updates.

Test the power outlets and any extensions.

Use an AC line tester to see if the outlet works, and then to check for reversed polarity, open lines or incorrect grounding. For best performance, the incoming power must be clean and properly grounded.

If multiple devices are connected to the same power circuit, move the system to another circuit.

Multiple amps or other high-powered equipment used on same power circuit could overload the circuit. At a venue, other devices that are out of view might be connected to the circuit. If another circuit is unavailable, turn each power stand on separately, waiting several seconds between powering on each one.

If using a power extension cord, follow these tips:

  1. If possible, do not use extension cords longer than necessary
  2. Try to use a single extension rather than multiple short extensions since as the connections between cords can add resistance
  3. Use higher-gauge, strudy cords

Reset your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more information, see Resetting your product.